Collected data from VK3KAW-1

Collected data from Site Alert installations

Here is an example of output data from SiteAlert.

Standard Telemetry.

VK3CV-1>TLM,VK3RMD-1*,qAO,VK3SB:T#085,057,134,084,022,036,00000000,SA3vB

Standard Alarm.

VK3CV-1>TLM,VK3RMD-1*,qAO,VK3SB:)AC-OFFCV!3723.00S214434.50EnSiteAlert VK3BYD

Standard Alarm Message.VK3CV-1>TLM,VK3RMD-1*,qAO,VK3SB::EMAIL :SiteAlert@abc.com AC-OFFCV2SiteAlert VK3BYD

Site Alert is now running on 3 digipeaters in Victoria and will be installed on another 3 digis in the future.

Current telemetry data for all Digipeaters can be found at the VK3 web site or at findu.com

SiteAlert Telemetry Graphing Example from findu.com

http://www.findu.com/cgi-bin/tele2.cgi?call=vk3cv-1&last=72

Your browser does not support inline frames or is currently configured not to display inline frames.

Legend
green = volts
red = temp
blue = ptt
purple = site alerts clock hours
black = site alerts clock minutes

A point to remember though is the TLM beacons from Digipeaters has to travel through up to two digis to the nearest IGate. Occasionally this results in corrupted data being recorded on FindU. This corrupted data is normal quite evident by its big shift away from its neighbouring telemetry values.

<BACK>